Home Office: Cisco w/ Broadworks -- How to setup your Cisco 7960 phone to work at home (Broadworks users)

« Go Back



                     Cisco 7960G
User-added image

If you're using Epik's Broadworks platform and would like to setup the Cisco IP phone 7960 at home, perform the following:
  1. Plug in the power adapter and Ethernet cable going to your router - press 'Settings'
  2. Press 3 for 'Network Configuration'
  3. Press 33 for 'Erase Configuration'
  4. Press * * #, and then click on the 'Yes', and then 'Save'
  5. Wait about 2 minutes.
  6. Press 'Settings' again.
  7. Press 3 for 'Network Configuration'
  8. Press 32 for 'Alternate TFTP'
  9. Press * * #, and then click on the 'Yes' button, DON'T click 'Save' at this point.
  10. Press 8 for 'TFTP Server1'
  11. Press 'Edit', change to the TFTP server provided to you by Epik Networks (EAST Server: and WEST Server: press ‘Validate’ and then press 'Save'.
Wait up to 10 more minutes, and the phone will come up.
You only need to go through the above procedure once per location. You can follow the same procedure to get the phone working anywhere else (i.e. somebody else's home, etc), basically anywhere you can connect to the internet through the Ethernet port.